status: failed
duration: 19.398s
Captured stdout call
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
The given state space system is a descriptor system with an E matrix. This is not supported
Length of H2 results:  30
Captured stderr call

  0%|          | 0/30 [00:00<?, ?it/s]
  3%|▎         | 1/30 [00:00<00:25,  1.12it/s]
  7%|▋         | 2/30 [00:01<00:27,  1.03it/s]
 10%|█         | 3/30 [00:02<00:21,  1.24it/s]
 13%|█▎        | 4/30 [00:03<00:17,  1.45it/s]
 17%|█▋        | 5/30 [00:03<00:15,  1.57it/s]
 20%|██        | 6/30 [00:04<00:14,  1.64it/s]
 23%|██▎       | 7/30 [00:04<00:15,  1.48it/s]
 27%|██▋       | 8/30 [00:05<00:13,  1.62it/s]
 30%|███       | 9/30 [00:05<00:12,  1.74it/s]
 33%|███▎      | 10/30 [00:06<00:11,  1.71it/s]
 37%|███▋      | 11/30 [00:07<00:10,  1.81it/s]
 40%|████      | 12/30 [00:07<00:09,  1.98it/s]
 43%|████▎     | 13/30 [00:07<00:08,  2.01it/s]
 47%|████▋     | 14/30 [00:08<00:07,  2.06it/s]
 50%|█████     | 15/30 [00:09<00:08,  1.81it/s]
 53%|█████▎    | 16/30 [00:09<00:07,  1.80it/s]
 57%|█████▋    | 17/30 [00:10<00:07,  1.82it/s]
 60%|██████    | 18/30 [00:10<00:06,  1.84it/s]
 63%|██████▎   | 19/30 [00:11<00:06,  1.62it/s]
 67%|██████▋   | 20/30 [00:13<00:09,  1.03it/s]
 70%|███████   | 21/30 [00:13<00:07,  1.13it/s]
 73%|███████▎  | 22/30 [00:14<00:06,  1.25it/s]
 77%|███████▋  | 23/30 [00:15<00:05,  1.39it/s]
 80%|████████  | 24/30 [00:15<00:03,  1.53it/s]
 83%|████████▎ | 25/30 [00:16<00:03,  1.44it/s]
 87%|████████▋ | 26/30 [00:17<00:02,  1.48it/s]
 90%|█████████ | 27/30 [00:17<00:01,  1.58it/s]
 93%|█████████▎| 28/30 [00:18<00:01,  1.67it/s]
 97%|█████████▋| 29/30 [00:18<00:00,  1.52it/s]
100%|██████████| 30/30 [00:19<00:00,  1.61it/s]
100%|██████████| 30/30 [00:19<00:00,  1.55it/s]
captured errors:
folder = 'ExampleModels'

    @pytest.mark.parametrize('folder', ['ExampleModels_rescale', 'ExampleModels', 'ExampleModels_working', 'ExampleModels_newFOM', 'ExampleModels_newFOM_F3'])
    def T_calc_H2(folder):
        sysB = get_systemB(folder = folder)
        FBNS_renorm = np.loadtxt(fjoin(folder, 'FBNS_scale.txt')) # Saved by the normalization in the make function
    
        if folder == 'ExampleModels_newFOM_F3':
            FOM_out = ["F3.out", "F2.out"]
        else:
            FOM_out = ["FBNS.out", "F2.out"]
        wn_in = ["S.in", "O.in"]
        control_in = ["U.in"]
        meas_out = ["T.out"]
    
        sysB.sys = ssutil.scale_io(sysB.sys, FOM_out[0], FBNS_scale)
        sysB.sys = ssutil.scale_io(sysB.sys, FOM_out[1], FFlat_scale)
    
        # Scale the DARM output
        if 'DARM.out' in sysB.sys.outputs.keys():
            print('scaling DARM')
            DARM_scale_factor = strain2m * SNR_intg_factor
            sysB.sys = ssutil.scale_io(sysB.sys, 'DARM.out', DARM_scale_factor)
    
        params = {}
        if folder == 'ExampleModels':
            params["F1_gain"] = np.geomspace(1e-0, 1e6, 30) * 1/FBNS_scale
        elif folder == 'ExampleModels_newFOM_F3':
            params["F1_gain"] = np.geomspace(1e-0, 1e6, 30) * 1/FBNS_scale
        else:
            params["F1_gain"] = np.geomspace(1e2, 1e6, 15) * 1/FBNS_scale
            #params["F1_gain"] = np.geomspace(1e2, 5e7, 30) * 1/FBNS_scale
    
        results_H2_bare = compute.calcOpt(
            sysB.sys,
            control_in,
            wn_in,
            meas_out,
            FOM_out,
            params,
            solver="LQG",
            plant_orig=sysB.orig_plant,
        )
    
        print("Length of H2 results: ", len(results_H2_bare))
    
>       current_range = np.loadtxt(fjoin(folder, 'FBNS_Current_range.txt')) # Saved by the normalization in the make function

/builds/buzz/test/ASC_SOLVER/test_solver_ADY.py:129: 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
/opt/conda/lib/python3.12/site-packages/numpy/lib/npyio.py:1373: in loadtxt
    arr = _read(fname, dtype=dtype, comment=comment, delimiter=delimiter,
/opt/conda/lib/python3.12/site-packages/numpy/lib/npyio.py:992: in _read
    fh = np.lib._datasource.open(fname, 'rt', encoding=encoding)
/opt/conda/lib/python3.12/site-packages/numpy/lib/_datasource.py:193: in open
    return ds.open(path, mode, encoding=encoding, newline=newline)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

self = <numpy.DataSource object at 0x7f8cd1ea1c40>
path = '/builds/buzz/test/ASC_SOLVER/ExampleModels/FBNS_Current_range.txt'
mode = 'rt', encoding = None, newline = None

    def open(self, path, mode='r', encoding=None, newline=None):
        """
        Open and return file-like object.
    
        If `path` is an URL, it will be downloaded, stored in the
        `DataSource` directory and opened from there.
    
        Parameters
        ----------
        path : str
            Local file path or URL to open.
        mode : {'r', 'w', 'a'}, optional
            Mode to open `path`.  Mode 'r' for reading, 'w' for writing,
            'a' to append. Available modes depend on the type of object
            specified by `path`. Default is 'r'.
        encoding : {None, str}, optional
            Open text file with given encoding. The default encoding will be
            what `io.open` uses.
        newline : {None, str}, optional
            Newline to use when reading text file.
    
        Returns
        -------
        out : file object
            File object.
    
        """
    
        # TODO: There is no support for opening a file for writing which
        #       doesn't exist yet (creating a file).  Should there be?
    
        # TODO: Add a ``subdir`` parameter for specifying the subdirectory
        #       used to store URLs in self._destpath.
    
        if self._isurl(path) and self._iswritemode(mode):
            raise ValueError("URLs are not writeable")
    
        # NOTE: _findfile will fail on a new file opened for writing.
        found = self._findfile(path)
        if found:
            _fname, ext = self._splitzipext(found)
            if ext == 'bz2':
                mode.replace("+", "")
            return _file_openers[ext](found, mode=mode,
                                      encoding=encoding, newline=newline)
        else:
>           raise FileNotFoundError(f"{path} not found.")
E           FileNotFoundError: /builds/buzz/test/ASC_SOLVER/ExampleModels/FBNS_Current_range.txt not found.

/opt/conda/lib/python3.12/site-packages/numpy/lib/_datasource.py:533: FileNotFoundError